SET RUNCLEAR

Purpose

Enable or disable clearing of the screen after the RUN / ! / !! Commands and the RUN() function.

Syntax

SET RUNCLEAR ON | OFF | (<expL>)

See Also

!, !!, DB_RUNLOG, DB_RUNOPTS, DB_RUNOPTS2, RUN, RUN(), SET RUNWAIT

Description

The SET RUNCLEAR command controls whether the screen is automatically cleared, before and after execution of an Operating System command via the RUN / ! / !! Commands or the RUN() function.

With SET RUNCLEAR ON, the screen is automatically cleared, and when SET RUNCLEAR is OFF, the display is retained. This later setting allows for more efficient execution of operating system commands that do not require any screen output. By default SET RUNCLEAR is ON.

This command allows the optional logical expression <expL> to be evaluated. If a value of .T. is returned, RUNCLEAR is set ON, otherwise it is set OFF.

Example

set runclear off
run sysbackup > /dev/null 2>/dev/null
set runclear on

Products

Recital